• source.cluster.alias

    Alias of source cluster

    Type:string
    Default:
    Valid Values:
    Importance:high
  • groups

    Consumer groups to replicate. Supports comma-separated group IDs and regexes.

    Type:list
    Default:.*
    Valid Values:
    Importance:high
  • groups.blacklist

    Deprecated. Use groups.exclude instead.

    Type:list
    Default:null
    Valid Values:
    Importance:high
  • groups.exclude

    Exclude groups. Supports comma-separated group IDs and regexes. Excludes take precedence over includes.

    Type:list
    Default:console-consumer-.*,connect-.*,__.*
    Valid Values:
    Importance:high
  • ssl.key.password

    The password of the private key in the key store file or the PEM key specified in 'ssl.keystore.key'.

    Type:password
    Default:null
    Valid Values:
    Importance:high
  • ssl.keystore.certificate.chain

    Certificate chain in the format specified by 'ssl.keystore.type'. Default SSL engine factory supports only PEM format with a list of X.509 certificates

    Type:password
    Default:null
    Valid Values:
    Importance:high
  • ssl.keystore.key

    Private key in the format specified by 'ssl.keystore.type'. Default SSL engine factory supports only PEM format with PKCS#8 keys. If the key is encrypted, key password must be specified using 'ssl.key.password'

    Type:password
    Default:null
    Valid Values:
    Importance:high
  • ssl.keystore.location

    The location of the key store file. This is optional for client and can be used for two-way authentication for client.

    Type:string
    Default:null
    Valid Values:
    Importance:high
  • ssl.keystore.password

    The store password for the key store file. This is optional for client and only needed if 'ssl.keystore.location' is configured. Key store password is not supported for PEM format.

    Type:password
    Default:null
    Valid Values:
    Importance:high
  • ssl.truststore.certificates

    Trusted certificates in the format specified by 'ssl.truststore.type'. Default SSL engine factory supports only PEM format with X.509 certificates.

    Type:password
    Default:null
    Valid Values:
    Importance:high
  • ssl.truststore.location

    The location of the trust store file.

    Type:string
    Default:null
    Valid Values:
    Importance:high
  • ssl.truststore.password

    The password for the trust store file. If a password is not set, trust store file configured will still be used, but integrity checking is disabled. Trust store password is not supported for PEM format.

    Type:password
    Default:null
    Valid Values:
    Importance:high
  • target.cluster.alias

    Alias of target cluster. Used in metrics reporting.

    Type:string
    Default:target
    Valid Values:
    Importance:high
  • sasl.client.callback.handler.class

    The fully qualified name of a SASL client callback handler class that implements the AuthenticateCallbackHandler interface.

    Type:class
    Default:null
    Valid Values:
    Importance:medium
  • sasl.jaas.config

    JAAS login context parameters for SASL connections in the format used by JAAS configuration files. JAAS configuration file format is described here. The format for the value is: loginModuleClass controlFlag (optionName=optionValue)*;. For brokers, the config must be prefixed with listener prefix and SASL mechanism name in lower-case. For example, listener.name.sasl_ssl.scram-sha-256.sasl.jaas.config=com.example.ScramLoginModule required;

    Type:password
    Default:null
    Valid Values:
    Importance:medium
  • sasl.kerberos.service.name

    The Kerberos principal name that Kafka runs as. This can be defined either in Kafka's JAAS config or in Kafka's config.

    Type:string
    Default:null
    Valid Values:
    Importance:medium
  • sasl.login.callback.handler.class

    The fully qualified name of a SASL login callback handler class that implements the AuthenticateCallbackHandler interface. For brokers, login callback handler config must be prefixed with listener prefix and SASL mechanism name in lower-case. For example, listener.name.sasl_ssl.scram-sha-256.sasl.login.callback.handler.class=com.example.CustomScramLoginCallbackHandler

    Type:class
    Default:null
    Valid Values:
    Importance:medium
  • sasl.login.class

    The fully qualified name of a class that implements the Login interface. For brokers, login config must be prefixed with listener prefix and SASL mechanism name in lower-case. For example, listener.name.sasl_ssl.scram-sha-256.sasl.login.class=com.example.CustomScramLogin

    Type:class
    Default:null
    Valid Values:
    Importance:medium
  • sasl.mechanism

    SASL mechanism used for client connections. This may be any mechanism for which a security provider is available. GSSAPI is the default mechanism.

    Type:string
    Default:GSSAPI
    Valid Values:
    Importance:medium
  • sasl.oauthbearer.jwks.endpoint.url

    The OAuth/OIDC provider URL from which the provider's JWKS (JSON Web Key Set) can be retrieved. The URL can be HTTP(S)-based or file-based. If the URL is HTTP(S)-based, the JWKS data will be retrieved from the OAuth/OIDC provider via the configured URL on broker startup. All then-current keys will be cached on the broker for incoming requests. If an authentication request is received for a JWT that includes a "kid" header claim value that isn't yet in the cache, the JWKS endpoint will be queried again on demand. However, the broker polls the URL every sasl.oauthbearer.jwks.endpoint.refresh.ms milliseconds to refresh the cache with any forthcoming keys before any JWT requests that include them are received. If the URL is file-based, the broker will load the JWKS file from a configured location on startup. In the event that the JWT includes a "kid" header value that isn't in the JWKS file, the broker will reject the JWT and authentication will fail.

    Type:string
    Default:null
    Valid Values:
    Importance:medium
  • sasl.oauthbearer.token.endpoint.url

    The URL for the OAuth/OIDC identity provider. If the URL is HTTP(S)-based, it is the issuer's token endpoint URL to which requests will be made to login based on the configuration in sasl.jaas.config. If the URL is file-based, it specifies a file containing an access token (in JWT serialized form) issued by the OAuth/OIDC identity provider to use for authorization.

    Type:string
    Default:null
    Valid Values:
    Importance:medium
  • security.protocol

    Protocol used to communicate with brokers. Valid values are: PLAINTEXT, SSL, SASL_PLAINTEXT, SASL_SSL.

    Type:string
    Default:PLAINTEXT
    Valid Values:(case insensitive) [SASL_SSL, PLAINTEXT, SSL, SASL_PLAINTEXT]
    Importance:medium
  • ssl.enabled.protocols

    The list of protocols enabled for SSL connections. The default is 'TLSv1.2,TLSv1.3' when running with Java 11 or newer, 'TLSv1.2' otherwise. With the default value for Java 11, clients and servers will prefer TLSv1.3 if both support it and fallback to TLSv1.2 otherwise (assuming both support at least TLSv1.2). This default should be fine for most cases. Also see the config documentation for `ssl.protocol`.

    Type:list
    Default:TLSv1.2
    Valid Values:
    Importance:medium
  • ssl.keystore.type

    The file format of the key store file. This is optional for client. The values currently supported by the default `ssl.engine.factory.class` are [JKS, PKCS12, PEM].

    Type:string
    Default:JKS
    Valid Values:
    Importance:medium
  • ssl.protocol

    The SSL protocol used to generate the SSLContext. The default is 'TLSv1.3' when running with Java 11 or newer, 'TLSv1.2' otherwise. This value should be fine for most use cases. Allowed values in recent JVMs are 'TLSv1.2' and 'TLSv1.3'. 'TLS', 'TLSv1.1', 'SSL', 'SSLv2' and 'SSLv3' may be supported in older JVMs, but their usage is discouraged due to known security vulnerabilities. With the default value for this config and 'ssl.enabled.protocols', clients will downgrade to 'TLSv1.2' if the server does not support 'TLSv1.3'. If this config is set to 'TLSv1.2', clients will not use 'TLSv1.3' even if it is one of the values in ssl.enabled.protocols and the server only supports 'TLSv1.3'.

    Type:string
    Default:TLSv1.2
    Valid Values:
    Importance:medium
  • ssl.provider

    The name of the security provider used for SSL connections. Default value is the default security provider of the JVM.

    Type:string
    Default:null
    Valid Values:
    Importance:medium
  • ssl.truststore.type

    The file format of the trust store file. The values currently supported by the default `ssl.engine.factory.class` are [JKS, PKCS12, PEM].

    Type:string
    Default:JKS
    Valid Values:
    Importance:medium
  • admin.timeout.ms

    Timeout for administrative tasks, e.g. detecting new topics.

    Type:long
    Default:60000 (1 minute)
    Valid Values:
    Importance:low
  • auto.include.jmx.reporter

    Deprecated. Whether to automatically include JmxReporter even if it's not listed in metric.reporters. This configuration will be removed in Kafka 4.0, users should instead include org.apache.kafka.common.metrics.JmxReporter in metric.reporters in order to enable the JmxReporter.

    Type:boolean
    Default:true
    Valid Values:
    Importance:low
  • checkpoints.topic.replication.factor

    Replication factor for checkpoints topic.

    Type:short
    Default:3
    Valid Values:
    Importance:low
  • consumer.poll.timeout.ms

    Timeout when polling source cluster.

    Type:long
    Default:1000 (1 second)
    Valid Values:
    Importance:low
  • emit.checkpoints.enabled

    Whether to replicate consumer offsets to target cluster.

    Type:boolean
    Default:true
    Valid Values:
    Importance:low
  • emit.checkpoints.interval.seconds

    Frequency of checkpoints.

    Type:long
    Default:60
    Valid Values:
    Importance:low
  • enabled

    Whether to replicate source->target.

    Type:boolean
    Default:true
    Valid Values:
    Importance:low
  • forwarding.admin.class

    Class which extends ForwardingAdmin to define custom cluster resource management (topics, configs, etc). The class must have a constructor with signature (Map config) that is used to configure a KafkaAdminClient and may also be used to configure clients for external systems if necessary.

    Type:class
    Default:org.apache.kafka.clients.admin.ForwardingAdmin
    Valid Values:
    Importance:low
  • group.filter.class

    GroupFilter to use. Selects consumer groups to replicate.

    Type:class
    Default:org.apache.kafka.connect.mirror.DefaultGroupFilter
    Valid Values:
    Importance:low
  • metric.reporters

    A list of classes to use as metrics reporters. Implementing the org.apache.kafka.common.metrics.MetricsReporter interface allows plugging in classes that will be notified of new metric creation. The JmxReporter is always included to register JMX statistics.

    Type:list
    Default:null
    Valid Values:
    Importance:low
  • offset-syncs.topic.location

    The location (source/target) of the offset-syncs topic.

    Type:string
    Default:source
    Valid Values:[source, target]
    Importance:low
  • refresh.groups.enabled

    Whether to periodically check for new consumer groups.

    Type:boolean
    Default:true
    Valid Values:
    Importance:low
  • refresh.groups.interval.seconds

    Frequency of group refresh.

    Type:long
    Default:600
    Valid Values:
    Importance:low
  • replication.policy.class

    Class which defines the remote topic naming convention.

    Type:class
    Default:org.apache.kafka.connect.mirror.DefaultReplicationPolicy
    Valid Values:
    Importance:low
  • replication.policy.separator

    Separator used in remote topic naming convention.

    Type:string
    Default:.
    Valid Values:
    Importance:low
  • sasl.kerberos.kinit.cmd

    Kerberos kinit command path.

    Type:string
    Default:/usr/bin/kinit
    Valid Values:
    Importance:low
  • sasl.kerberos.min.time.before.relogin

    Login thread sleep time between refresh attempts.

    Type:long
    Default:60000
    Valid Values:
    Importance:low
  • sasl.kerberos.ticket.renew.jitter

    Percentage of random jitter added to the renewal time.

    Type:double
    Default:0.05
    Valid Values:
    Importance:low
  • sasl.kerberos.ticket.renew.window.factor

    Login thread will sleep until the specified window factor of time from last refresh to ticket's expiry has been reached, at which time it will try to renew the ticket.

    Type:double
    Default:0.8
    Valid Values:
    Importance:low
  • sasl.login.connect.timeout.ms

    The (optional) value in milliseconds for the external authentication provider connection timeout. Currently applies only to OAUTHBEARER.

    Type:int
    Default:null
    Valid Values:
    Importance:low
  • sasl.login.read.timeout.ms

    The (optional) value in milliseconds for the external authentication provider read timeout. Currently applies only to OAUTHBEARER.

    Type:int
    Default:null
    Valid Values:
    Importance:low
  • sasl.login.refresh.buffer.seconds

    The amount of buffer time before credential expiration to maintain when refreshing a credential, in seconds. If a refresh would otherwise occur closer to expiration than the number of buffer seconds then the refresh will be moved up to maintain as much of the buffer time as possible. Legal values are between 0 and 3600 (1 hour); a default value of 300 (5 minutes) is used if no value is specified. This value and sasl.login.refresh.min.period.seconds are both ignored if their sum exceeds the remaining lifetime of a credential. Currently applies only to OAUTHBEARER.

    Type:short
    Default:300
    Valid Values:[0,...,3600]
    Importance:low
  • sasl.login.refresh.min.period.seconds

    The desired minimum time for the login refresh thread to wait before refreshing a credential, in seconds. Legal values are between 0 and 900 (15 minutes); a default value of 60 (1 minute) is used if no value is specified. This value and sasl.login.refresh.buffer.seconds are both ignored if their sum exceeds the remaining lifetime of a credential. Currently applies only to OAUTHBEARER.

    Type:short
    Default:60
    Valid Values:[0,...,900]
    Importance:low
  • sasl.login.refresh.window.factor

    Login refresh thread will sleep until the specified window factor relative to the credential's lifetime has been reached, at which time it will try to refresh the credential. Legal values are between 0.5 (50%) and 1.0 (100%) inclusive; a default value of 0.8 (80%) is used if no value is specified. Currently applies only to OAUTHBEARER.

    Type:double
    Default:0.8
    Valid Values:[0.5,...,1.0]
    Importance:low
  • sasl.login.refresh.window.jitter

    The maximum amount of random jitter relative to the credential's lifetime that is added to the login refresh thread's sleep time. Legal values are between 0 and 0.25 (25%) inclusive; a default value of 0.05 (5%) is used if no value is specified. Currently applies only to OAUTHBEARER.

    Type:double
    Default:0.05
    Valid Values:[0.0,...,0.25]
    Importance:low
  • sasl.login.retry.backoff.max.ms

    The (optional) value in milliseconds for the maximum wait between login attempts to the external authentication provider. Login uses an exponential backoff algorithm with an initial wait based on the sasl.login.retry.backoff.ms setting and will double in wait length between attempts up to a maximum wait length specified by the sasl.login.retry.backoff.max.ms setting. Currently applies only to OAUTHBEARER.

    Type:long
    Default:10000 (10 seconds)
    Valid Values:
    Importance:low
  • sasl.login.retry.backoff.ms

    The (optional) value in milliseconds for the initial wait between login attempts to the external authentication provider. Login uses an exponential backoff algorithm with an initial wait based on the sasl.login.retry.backoff.ms setting and will double in wait length between attempts up to a maximum wait length specified by the sasl.login.retry.backoff.max.ms setting. Currently applies only to OAUTHBEARER.

    Type:long
    Default:100
    Valid Values:
    Importance:low
  • sasl.oauthbearer.clock.skew.seconds

    The (optional) value in seconds to allow for differences between the time of the OAuth/OIDC identity provider and the broker.

    Type:int
    Default:30
    Valid Values:
    Importance:low
  • sasl.oauthbearer.expected.audience

    The (optional) comma-delimited setting for the broker to use to verify that the JWT was issued for one of the expected audiences. The JWT will be inspected for the standard OAuth "aud" claim and if this value is set, the broker will match the value from JWT's "aud" claim to see if there is an exact match. If there is no match, the broker will reject the JWT and authentication will fail.

    Type:list
    Default:null
    Valid Values:
    Importance:low
  • sasl.oauthbearer.expected.issuer

    The (optional) setting for the broker to use to verify that the JWT was created by the expected issuer. The JWT will be inspected for the standard OAuth "iss" claim and if this value is set, the broker will match it exactly against what is in the JWT's "iss" claim. If there is no match, the broker will reject the JWT and authentication will fail.

    Type:string
    Default:null
    Valid Values:
    Importance:low
  • sasl.oauthbearer.jwks.endpoint.refresh.ms

    The (optional) value in milliseconds for the broker to wait between refreshing its JWKS (JSON Web Key Set) cache that contains the keys to verify the signature of the JWT.

    Type:long
    Default:3600000 (1 hour)
    Valid Values:
    Importance:low
  • sasl.oauthbearer.jwks.endpoint.retry.backoff.max.ms

    The (optional) value in milliseconds for the maximum wait between attempts to retrieve the JWKS (JSON Web Key Set) from the external authentication provider. JWKS retrieval uses an exponential backoff algorithm with an initial wait based on the sasl.oauthbearer.jwks.endpoint.retry.backoff.ms setting and will double in wait length between attempts up to a maximum wait length specified by the sasl.oauthbearer.jwks.endpoint.retry.backoff.max.ms setting.

    Type:long
    Default:10000 (10 seconds)
    Valid Values:
    Importance:low
  • sasl.oauthbearer.jwks.endpoint.retry.backoff.ms

    The (optional) value in milliseconds for the initial wait between JWKS (JSON Web Key Set) retrieval attempts from the external authentication provider. JWKS retrieval uses an exponential backoff algorithm with an initial wait based on the sasl.oauthbearer.jwks.endpoint.retry.backoff.ms setting and will double in wait length between attempts up to a maximum wait length specified by the sasl.oauthbearer.jwks.endpoint.retry.backoff.max.ms setting.

    Type:long
    Default:100
    Valid Values:
    Importance:low
  • sasl.oauthbearer.scope.claim.name

    The OAuth claim for the scope is often named "scope", but this (optional) setting can provide a different name to use for the scope included in the JWT payload's claims if the OAuth/OIDC provider uses a different name for that claim.

    Type:string
    Default:scope
    Valid Values:
    Importance:low
  • sasl.oauthbearer.sub.claim.name

    The OAuth claim for the subject is often named "sub", but this (optional) setting can provide a different name to use for the subject included in the JWT payload's claims if the OAuth/OIDC provider uses a different name for that claim.

    Type:string
    Default:sub
    Valid Values:
    Importance:low
  • ssl.cipher.suites

    A list of cipher suites. This is a named combination of authentication, encryption, MAC and key exchange algorithm used to negotiate the security settings for a network connection using TLS or SSL network protocol. By default all the available cipher suites are supported.

    Type:list
    Default:null
    Valid Values:
    Importance:low
  • ssl.endpoint.identification.algorithm

    The endpoint identification algorithm to validate server hostname using server certificate.

    Type:string
    Default:https
    Valid Values:
    Importance:low
  • ssl.engine.factory.class

    The class of type org.apache.kafka.common.security.auth.SslEngineFactory to provide SSLEngine objects. Default value is org.apache.kafka.common.security.ssl.DefaultSslEngineFactory

    Type:class
    Default:null
    Valid Values:
    Importance:low
  • ssl.keymanager.algorithm

    The algorithm used by key manager factory for SSL connections. Default value is the key manager factory algorithm configured for the Java Virtual Machine.

    Type:string
    Default:SunX509
    Valid Values:
    Importance:low
  • ssl.secure.random.implementation

    The SecureRandom PRNG implementation to use for SSL cryptography operations.

    Type:string
    Default:null
    Valid Values:
    Importance:low
  • ssl.trustmanager.algorithm

    The algorithm used by trust manager factory for SSL connections. Default value is the trust manager factory algorithm configured for the Java Virtual Machine.

    Type:string
    Default:PKIX
    Valid Values:
    Importance:low
  • sync.group.offsets.enabled

    Whether to periodically write the translated offsets to __consumer_offsets topic in target cluster, as long as no active consumers in that group are connected to the target cluster

    Type:boolean
    Default:false
    Valid Values:
    Importance:low
  • sync.group.offsets.interval.seconds

    Frequency of consumer group offset sync.

    Type:long
    Default:60
    Valid Values:
    Importance:low
  • topic.filter.class

    TopicFilter to use. Selects topics to replicate.

    Type:class
    Default:org.apache.kafka.connect.mirror.DefaultTopicFilter
    Valid Values:
    Importance:low
  • name

    Globally unique name to use for this connector.

    Type:string
    Default:
    Valid Values:non-empty string without ISO control characters
    Importance:high
  • connector.class

    Name or alias of the class for this connector. Must be a subclass of org.apache.kafka.connect.connector.Connector. If the connector is org.apache.kafka.connect.file.FileStreamSinkConnector, you can either specify this full name, or use "FileStreamSink" or "FileStreamSinkConnector" to make the configuration a bit shorter

    Type:string
    Default:
    Valid Values:
    Importance:high
  • tasks.max

    Maximum number of tasks to use for this connector.

    Type:int
    Default:1
    Valid Values:[1,...]
    Importance:high
  • key.converter

    Converter class used to convert between Kafka Connect format and the serialized form that is written to Kafka. This controls the format of the keys in messages written to or read from Kafka, and since this is independent of connectors it allows any connector to work with any serialization format. Examples of common formats include JSON and Avro.

    Type:class
    Default:null
    Valid Values:
    Importance:low
  • value.converter

    Converter class used to convert between Kafka Connect format and the serialized form that is written to Kafka. This controls the format of the values in messages written to or read from Kafka, and since this is independent of connectors it allows any connector to work with any serialization format. Examples of common formats include JSON and Avro.

    Type:class
    Default:null
    Valid Values:
    Importance:low
  • header.converter

    HeaderConverter class used to convert between Kafka Connect format and the serialized form that is written to Kafka. This controls the format of the header values in messages written to or read from Kafka, and since this is independent of connectors it allows any connector to work with any serialization format. Examples of common formats include JSON and Avro. By default, the SimpleHeaderConverter is used to serialize header values to strings and deserialize them by inferring the schemas.

    Type:class
    Default:null
    Valid Values:
    Importance:low
  • config.action.reload

    The action that Connect should take on the connector when changes in external configuration providers result in a change in the connector's configuration properties. A value of 'none' indicates that Connect will do nothing. A value of 'restart' indicates that Connect should restart/reload the connector with the updated configuration properties.The restart may actually be scheduled in the future if the external configuration provider indicates that a configuration value will expire in the future.

    Type:string
    Default:restart
    Valid Values:[none, restart]
    Importance:low
  • transforms

    Aliases for the transformations to be applied to records.

    Type:list
    Default:""
    Valid Values:non-null string, unique transformation aliases
    Importance:low
  • predicates

    Aliases for the predicates used by transformations.

    Type:list
    Default:""
    Valid Values:non-null string, unique predicate aliases
    Importance:low
  • errors.retry.timeout

    The maximum duration in milliseconds that a failed operation will be reattempted. The default is 0, which means no retries will be attempted. Use -1 for infinite retries.

    Type:long
    Default:0
    Valid Values:
    Importance:medium
  • errors.retry.delay.max.ms

    The maximum duration in milliseconds between consecutive retry attempts. Jitter will be added to the delay once this limit is reached to prevent thundering herd issues.

    Type:long
    Default:60000 (1 minute)
    Valid Values:
    Importance:medium
  • errors.tolerance

    Behavior for tolerating errors during connector operation. 'none' is the default value and signals that any error will result in an immediate connector task failure; 'all' changes the behavior to skip over problematic records.

    Type:string
    Default:none
    Valid Values:[none, all]
    Importance:medium
  • errors.log.enable

    If true, write each error and the details of the failed operation and problematic record to the Connect application log. This is 'false' by default, so that only errors that are not tolerated are reported.

    Type:boolean
    Default:false
    Valid Values:
    Importance:medium
  • errors.log.include.messages

    Whether to include in the log the Connect record that resulted in a failure.For sink records, the topic, partition, offset, and timestamp will be logged. For source records, the key and value (and their schemas), all headers, and the timestamp, Kafka topic, Kafka partition, source partition, and source offset will be logged. This is 'false' by default, which will prevent record keys, values, and headers from being written to log files.

    Type:boolean
    Default:false
    Valid Values:
    Importance:medium